Order of Assembly
1. Mount the motherboard -- use fine thread metal screws
2. Identify components - LED connectors for lights on/off
3. Install video card
4. Audio cable with N/C cable (wake on LAN) -- allows end user to turn off/on computer remotely.
5. Install NIC
6. Install Memory (RAM 72 pin SIMMS)
7. Install CPU with power fan
8. Install Floppy & HD (coarse thread screws)
9. Install CD ROM (fine thread screws)
LABEL These Diagrams
NOTES: Discharge static electricity by touching the unplugged power supply before touching any other component. Remove all jewelry from fingers and wrist.
To install all cables for I/O make sure to identify the number 1 pin (red cabling) and attach to number 1 pin slot on both device & motherboard. Floppy drive cable has identifiable "twist".